How to Make UV Resin Earrings, DIY Flower Earrings, Easy Earrings Tutorial, Flower Resin Tutorial

You will need packing tape, earring frames, UV resin, a toothpick, a lighter, dried flowers, iridescent stones, rhinestones, earring hooks, and a display for the earrings.

Cut two small strips of tape and one long strip. Place the small strips on the edges of the long strip, with the sticky side facing down for the small strips and facing up for the long strip. This will keep the tape in place while you work.

Place the earring frames on the sticky side of the tape. Make sure they are flush with the tape so that resin doesn't seep out. Apply a thin coat of UV resin to close up the frame and act as the back layer.

Use a toothpick to ensure the first layer of resin is not sticky. Then, place the dried flowers into the frames. You can also add in iridescent stones or rhinestones for additional decoration.

Add a final layer of resin to the frames, making sure to cover any flowers or stones. Pop any bubbles with a lighter and cure the resin under a UV lamp for a few minutes. Remove the tape from the frames and clean off any sticky residue if necessary. Attach earring hooks to each frame and your earrings are finished.